Search for a Model

BasicFeaturesSpecsAccessories

SLRB40TBLW Basics

Style: Roller-Bunk

Finish Options:

Carrying Capacity: 4000 lb.

Hull Length: 240 inches

Transom to Bow Eye: 220 inches

SERVICE MANUAL

Owner's Manual

Warranty

SLRB40TBLW Features

Title	Description	Standard	Optional
Chrome Graphics	Our stylish chrome design match your boat's trim.
Fully adjustable winch post
Fully Carpeted Bunks
Patented Roller Design	The ShoreLand'r roller has a glass-filled, thermoplastic hub for strength and a bonded rubber surface. Its cat's-eye shaped axis gives the roller a larger bearing surface on which to rotate, and in turn is specially designed to limit lateral swivel for more control during loading.
Advanced Keel Support	Multiple 8" rollers on a dual-pivoting bracket provide equalized and constant support directly to the keel of the boat, its strongest point. Smaller units use a polyethylene pad or a single roller depending on capacity of the trailer. The pads on the crossmember protect the hull and help center the boat during loading.
Profile 2000 Winch	The sleek, patented design of our Profile 2000 Winch houses an extra wide bow stop and safety chain. It's advanced design allows full adjustability and is pre-stamped to accept the optional tongue jack.
Superior Running Gear	Easily moved to fine-tune tongue weight for proper towing characteristics.
Patented Equiload System	Our patented EquiLoad Support System evenly distributes the weight of your boat for smooth launching and loading. The teeter-totter style bracket pivots on the rear cross-member to insure that every square inch of bunk or roller is doing its share to support your boat-s hull.
Heavy Duty Steel Tube Frame	Our welded, steel tube frame is the strongest in the industry. It proveds less flex and optimum support to ensure longer trailer life.
Superior Quality Finish	Powder-Coated Paint Our powder coating system provides more uniform coverage and a more durable finish for your trailer. With the characteristics of an automotive finish, it has a deep luster, will not fade and resists chipping. Galvanized Protection For maximum durability all models are available in hot-dipped galvanized finish.
Custom Molded Fenders	The industry standard has been set by the patented, ShoreLand'r Custom Molded Fender. Every fender is molded from a composite material that will not rust and springs back after minor impact. The larger series' fenders have integrated step pads and are enclosed on the inside to protect the side of the boat.
Bolt-On Coupler	The coupler is bolted on for easy replacement if necessary.
Enclosed Plug-in Wiring	Quick connect plug allows for easy hookup to tow vehicle and plug-in frame sections make maintenance a snap.
Double Safety Chains	Added towing protection.
Removable Tongue	Permits storage in confined areas. Ask about our optional Swing Tongue.
Bow Eye Safety Chain	For added towing safety.
Bearing Protectors	Keep grease in and water out to prolong the life of the running gear.
Protective Pads	On all cross-members and axles to protect the keel if contact is made during loading.
Waterproof Side Marker Lights	Equipped with a separate ground wire to guard against failure.
Frame Grommets	To protect wiring and keep from making contact with frame.
Drop Axle	Drop axle gives trailer a lower profile for smoother towing and easier loading. The robot-welded spindles ensure perfect welds and precise axle alignment.
Dual Purpose Step Pad	This handy step pad adds cushion to the frame where it is most vulnerable during loading.
Transom Tie-Down Point	conveniently located for securing your transom tie-down straps
Submersible Taillights
Spare Tire Bracket
Spare Tire
Tongue Jack
NMMA Certified	The "NMMA Certified" decal is your guarantee that every ShoreLand'r is built to meet or exceed the National Marine Manufacturers Association safety and quality standards. Don't settle for less!

SLRB40TBLW Specs

Minimum Hull Length: 216 Inches

Maximum Hull Length: 240 Inches

Maximum Transom to Bow Eye: 220 Inches

Capacity: 4000 lbs.

Ship Weight: 945 lbs.

GVWR: 5440 lbs.

GAWR: 2720 lbs.

Tires: ST175/80R13-C

Wheel Style: Directional

Frame Size: 2"x4"x11 ga.

Frame Width: 80.5 Inches

Overall Width: 99.5 Inches

Rear Cross Member Adjustment: 12 Inches

Max. Overall Length: 265 Inches

Frame Height: 23 Inches

Fender Style: 9" Injection Molded w/Step

Width Between Fenders: 84.5 Inches

Tongue Tube Size: 3"x5"x11 ga.

Tongue Length: 55 Inches

Coupler Size: 2" Brake Actuator

Axle Size or Style: 2"x3"x7 ga.

Hub Size: 1 3/8" X 1 1/16"

Bolt Pattern: 5 bolts on 4.5"

Bearing Protectors: Standard

Suspension Type: Leaf Spring

Spring Length: 21.75 (Hook)

Number of Leaves: 5

Bunk Dimensions: 2x6

Bunk Length: 57

Keel Rollers (# - size): 6 - 8"

Keel Protective Pads (# - size): 3 - 15"

Keel Protective Pads (# - size): 2 - 12"

Winch: DL1802A

Winch Line: 2" Nylon Strap

Brake Size / Style: 10" Disc Standard 1 Axle

Brake Actuator Model: UFP Model A70

Lighting: Sealed LED

Wire Harness: Fully Grounded

Trailer Style: Roller-Bunk

SLRB40TBLW Accessories

Click on a category to view accessories for that category.

Accessory

Brakes/Chassis

Bunk Support

Load Guides

Riser Kits

Spare Tire

Tongue/Coupler

Winch

Standard Models +